468PRIORITY WATCH8 Priority watch operationq Select VFO mode; then, set an operating frequency.w Set the watching channel(s).For memory channel watch:Select the desired memory channel.For memory scan watch:Select memory mode; then, push [V/MHz•SCAN] for 1 sec.to start memory scan.For call channel watch:Select the desired call channel by pushing [M/CALL•PRIO]once or twice, then push [BAND].e Push [M/CALL•PRIO] for 1 sec. to start the watch.• The transceiver checks the memory or call channel every 5 sec.• The watch resumes according to the selected scan resume con-dition. (p. 44)• While the watch is pausing, pushing [M/CALL•PRIO] resumesthe watch manually.r Push [M/CALL•PRIO] for 1 sec. to stop the watch.z Select VFO mode; then, set the desired fre-quency.x Set the watching channel(s).For memory channel watch:Push [MR/CALL] then [Y] or [Z] to select the de-sired memory channel.For memory scan watch:Push [MR/CALL], then push [ SCAN 2] to start thememory scan.For call channel watch:Push [MR/CALL] for 1 sec. then push [BAND] toselect the call channel.c Push [PRIO 3(PTT-M)] to start the watch.• The transceiver checks the memory or call channelevery 5 sec.• The watch resumes according to the selected scan re-sume condition. (p. 44)• To resume the watch manually when paused, push[PRIO 3(PTT-M)] or [ CLR A(MW)].v To stop the watch, push [ CLR A(MW)] once (ortwice while watch is paused).PRIO3

explicit definitions

quick reference guide

using the mounting bracket

microphone connection

battery connection

antenna installation

i repeater operation

i programming memory channels

PANEL DESCRIPTION

I Function display

I Rear panel

I Microphone (HM-133)

I Microphone keypad

I Optional microphones (HM-118N/TN)

SETTING A FREQUENCY

I Using the tuning dial

I Tuning step selection

I Lock functions

BASIC OPERATION

I Squelch attenuator

I Transmitting

I One-touch PTT function

REPEATER OPERATION

I Accessing a repeater

I Subaudible tones

I Offset frequency

MEMORY OPERATION

I Programming a memory channel

I Copying memory contents

I Memory clearing

I Programming channel names

I Memory bank selection

I Memory bank setting

I Transferring bank contents

CALL CHANNEL OPERATION

I Programming a call channel

SCAN OPERATION

I Scan start/stop

I Scan edges programming

I Skip channel setting

I Scan resume condition

PRIORITY WATCH

I Priority watch operation

I Programming a DTMF code

dtmf memory encoder

I Transmitting a DTMF code

I Pocket beep operation

pocket beep and tone squelch

tone scan

other functions

I Initial set mode

I AM/FM narrow mode

i microphone keys

I Partial reset

I Data cloning

i packet operation

I Troubleshooting

i fuse replacement

I Speciﬁcations

I Options

mode arrangement

Icom IC-E208 Instruction Manual

IC-E208