Icom IC-R30 Advanced Manual

Also see for IC-R30: Setup instructions Service manual Basic Manual Advanced manual

7 OTHER FUNCTIONS7-18■ Home channel functionHome channels are often-used frequencies you can preset in the receiver’s VFO modeand Memory mode.D Home channel settingExample: In the VFO mode1. Select a mode (VFO or Memory), frequency or channel in which you want to set theHome channel.2. Push [QUICK].3. Select “Home CH Set.”(Rotate [DIAL] to select it, and then push [ENTER].)4. Select “Set Frequency.”L If you set a channel, select “Set Channel” in the Memory mode.L To clears the Home channel, select “Clear.”D Home CH Beep functionWhen the set Home CH is selected by rotating [DIAL], a beep sounds.You van make the Home CH selection without looking at the display.You can assign the [Home CH] key function to an optional VS-3 key. (pp. 6-31, 6-32 and 8-4)L You can turn OFF the Home CH Beep function on the MENU screen.([MENU] > Sounds > Home CH Beep)Cancelingthe Home channel