Icom IC-R30 Advanced Manual

Also see for IC-R30: Setup instructions Service manual Basic Manual Advanced manual

4 MEMORY OPERATION4-7■ Writing a memory channel (Continued)D Write to the Selected ChannelThe selected channel is overwritten.Example: Writing 145.000 MHz to channel 08 in group 00.1. Push [VFO/MR] to select the Memory mode.2. Rotate [DIAL] to select the channel to be written.3. Push [VFO/MR] to select the VFO mode.4. Rotate [DIAL] to set the frequency and receive mode.5. Push [MW].6. Select “Write to Selected CH.”(Rotate [DIAL] to select it, and then push [ENTER].)• The selected Memory channel blinks.L You can change the channel to be written, by rotating [DIAL].7. Push [MW].• A confirmation dialog appears.8. Select “Yes.”• Beeps sound and the memory channel is written, then returns to the VFO mode.Target Memory channel Set the frequency(In the VFO mode)