5 GPS OPERATION5-28■ GPS Logger function (Continued)D The <> modeThe receiver has an exclusive GPS Logger mode where only the GPS Logger functions.This mode is useful when you are traveling and do not want to use the receiver forcommunication, but you do want to use just the GPS Logger.D <> outlineTo use GPS Logger function, do the following:1. Insert a microSD card (User supplied).2. Confirm that the GPS receiver is receiving your position data. (p. 5-4)3. Confirm that the GPS Logger function is ON. (p. 5-24)4. Turn ON the <> mode.↓Completed.You can start using the <> mode.D Setting the <> mode1. Push [QUICK].2. Select “<>.”(Rotate [DIAL] to select it, and then push [ENTER].)• “Only GPS Logger is now functioning.” is displayed.L You can also select the <> mode on the MENU screen.([MENU] > GPS > GPS Logger > <>)TIP: To cancel the <> modeTurn OFF the receiver, then turn it ON again.L When the receiver is tuned ON again, the normal GPS Logger function is still ON.L While in the GPS Logger Only mode, you cannot operate the receiver except the GPSLogger function.
