Icom IC-R30 Advanced Manual

Also see for IC-R30: Setup instructions Service manual Basic Manual Advanced manual

6 MENU SCREEN6-15■ Digital Set (Continued)Separator/Decimal (Default: Sep [,] Dec [.])[MENU] > Digital Set > RX Log > CSV Format > Separator/DecimalSelect the separator and decimal character for the csv format.• Sep [,] Dec [.]: Separator is “,” and Decimal is “.”• Sep [;] Dec [.]: Separator is “;” and Decimal is “.”• Sep [;] Dec [,]: Separator is “;” and Decimal is “,”Date (Default: mm/dd/yyyy)[MENU] > Digital Set > RX Log > CSV Format > DateSelect the separator and decimal character for the csv format.Select the date format between “yyyy/mm/dd,” “mm/dd/yyyy,” and “dd/mm/yyyy.”(y: year, m: month, d: day)D-STAR Auto Detect (Default: OFF)[MENU] > Digital Set > D-STAR Auto DetectTurn the D-STAR Mode Automatic Detect function ON or OFF.When in the D-STAR mode, if you receive a non-D-STAR signal, this functionautomatically sets the receive mode to the FM mode.• OFF: Turns OFF the function. The receive mode is fixed to the D-STARmode.• ON: Automatically selects the FM mode for temporary operation.RX Record (D-STAR RPT) (Default: ALL)[MENU] > Digital Set > RX Record (D-STAR RPT)The receiver can record the data of up to 50 individual calls. When the received signalincludes a status message (“UR?” or “RPT?”) that is sent back from the Access repeater,you can record up to 50 messages, or only the last call, in the Received Call Record.• ALL: Records up to 50 calls.• Latest Only: Records only the last call.D-STAR EMR AF Level (Default: 19)[MENU] > Digital Set > D-STAR EMR AF LevelSet the audio output level to between 0 and 39 for when an EMR communication signalis received. When an EMR signal is received, the audio is heard at this set level, or thevolume control level, whichever is higher.To disable the setting, set to “0.”NOTE: After an EMR signal disappears, the audio level will remain at the EMR level. Inthis case, adjust the audio level.