Icom IC-R30 Advanced Manual

Also see for IC-R30: Setup instructions Service manual Basic Manual Advanced manual

5 GPS OPERATION5-23■ GPS Memory (Continued)D Setting the GPS Alarm function to All Memories[MENU] > GPS > GPS Alarm1. Push [MENU].2. Select “GPS Alarm” in the “GPS” menu.(Rotate [DIAL] to select it, and then push [ENTER].)3. Select “Alarm Select.”4. Select an Alarm type.• OFF: Turns OFF the GPS Alarm function.• RX: When a station with its GPS Alarm set enters the range, the alarmsounds.• Group: When either one of the stations in the group enters the set range,the alarm sounds.(Select a GPS Memory group from “(No Group)” and “A” to “Z.”)• Memory: When a station with its GPS Alarm set enters within an approximate1 kilometer (1094 yard) range, the alarm sounds once.5. Push [CLEAR] to return to the Main screen.L When the alarm sounds, “GPS ALARM” appears up on the screen.L To cancel the GPS Alarm function, select “OFF” in step 4.TIP:You can change the Alarm activation area.Group: ([MENU] > GPS > GPS Alarm > Alarm Area (Group))RX/Memory: ([MENU] > GPS > GPS Alarm > Alarm Area (RX/Memory))When the alarm soundsThe GPS Alarm icon blinksWhen “Group” is selected:When either one of the stations in the group enters theset range, the alarm sounds 3 times.When “RX/Memory” is selected:When a station with its GPS Alarm set enters within anapproximate 1 kilometer (1094 yard) range, the alarmsounds once. When it enters within an approximate 500meter (547 yard) range, the alarm sounds 3 times.NOTE: Even if “RX” is selected in step 4, when the received signal has no positiondata, the GPS Alarm does not sound.