Icom IC-V8000 Instruction Manual

Also see for IC-V8000: Service manual Instruction manual Service manual Optional instructions

266MEMORY OPERATION123456789101112131415161718192021 Programming a memory channel via the microphone[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.Push Push Push then momentarily.Push Push then 1 sec. and continue to pushing ➠BeepBeepBeep“““““The microphone can also be used to program mem-ory channels.z Set the desired frequency in VFO mode.➥ Push [VFO/LOCK] to select VFO mode.➥ Set the frequency using the keypad.➥ Set other data (e.g. offset frequency, duplex direction, sub-audible tone encoder ON/OFF and its frequency) , if neces-sary.x Push [FUNC], then [CLR A(MW)] momentarily.c Select the memory channel to be programmed.➥ Push [Y] or [Z] to select the memory channel (direct nu-meral input cannot be used).v Push [FUNC] then [CLR A(MW)] for 1 sec. to program.➥ 3 beeps may sound and the VFO contents (includingthe subaudible tone frequency, etc.) are programmed.➥ Memory channel number advances when continuing topush [CLR A(MW)] after programming.MW