Icom IC-V8000 Instruction Manual

Also see for IC-V8000: Service manual Instruction manual Service manual Optional instructions

45DTMF MEMORY ENCODER12345678910111213141516171819202110 Programming a DTMF codeDTMF codes are used for autopatching, controlling otherequipment, etc. The transceiver has 10 DTMF memory chan-nels (d0–d9) for storage of often-used DTMF codes of up to24 digits.z Push [FUNC] then [ LOW 6(DTCS)] to turn theDTMF encoder ON.• “d” appears in place of the 100 MHz digit.x Push [ SET B(D-OFF)] to enter the DTMF mem-ory programming condition.c Push [Y] or [Z] to select the desired DTMFmemory channel.v Push the desired digit keys.• When the first digit is input, previous memory contents arecleared automatically.• “E” stands for “M” and “F” stands for “# .”• Push [Y]/[Z] and repeat this step if you make a mistake.• The S/RF indicator shows the digit group. The indication in-creases every 6 digits.b Push [VFO/LOCK] to exit the programming condition.• The [CLR A(MW)] key cannot be used to exit. If pushed, code “A”is input and the previously programmed data is erased. Repro-gram in such a case.DTMF[EXAMPLE]: Programming “5428AB453” into DTMF memory channel “d4.”PushPush PushPushPush then .