276 MEMORY OPERATION Transferring memory contentsThis function transfers a memory channel’s contents to VFO(or another memory/call channel). This is useful when search-ing for signals around a memory channel frequency and forrecalling the offset frequency, subaudible tone frequency etc.D Memory/call➪VFOq Select the memory/call channel to be transferred.➥ Push [M/CALL(PRIO)] to select memory mode, then ro-tate the tuning dial to select the desired memory channel.➥ Push [M/CALL(PRIO)] for 1 sec. to select the call channel.w Push [MW(S.MW)] for 1 sec. to transfer the selected mem-ory/call channel contents to the VFO.• VFO mode is selected automatically.z Select the memory/call channel to betransferred.➥ Push [MR/CALL] to select memory mode,then select the desired memory channelvia [Y]/[Z] or keypad.➥ Push [MR/CALL] for 1 sec. to select thecall channel.x Push [FUNC], then [CLR A(MW)] for 1 sec. totransfer the selected memory/call channelcontents to the VFO.• VFO mode is selected automatically.MR/CALLMW[Y]/[Z][EXAMPLE]: Transferring memory channel 30 contents to VFO.Push to select memory mode.Push to select memory mode.Rotate for selecting memory channel.Select memory channel.Push for 1 sec.Push then push for 1 sec.S.MWMWPRIOM/CALL

explicit definitions

panel description

i function display

i rear panel

i microphone keypad

using the mounting bracket

i battery connection

i antenna installation

setting a frequency

i using the keypad

i tuning step selection

i lock functions

basic operation

i audio mute function

i selecting output power

repeater operation

subaudible tones

d frequency range and offset direction

repeater lockout

i programming a memory channel

i programming a memory channel via the microphone

i transferring memory contents

i memory clearing

i memory bank selection

i memory bank setting

call channel operation

i programming a call channel

scan operation

i scan edges programming

i skip channel setting

i scan resume condition

priority watch

i priority watch operation

dtmf memory encoder

transmitting a dtmf code

i dtmf speed

pocket beep and tone squelch

tone scan

Icom IC-V8000 Instruction Manual

RECEIVER CIRCUITS

MAIN UNIT

PLL CIRCUITS

HM-133V

LOGIC BOARD

IC-V8000

quick reference guide

battery connection

antenna installation

i repeater operation

I Front panel

I Function display

I Rear panel

I Microphone (HM-133V)

I Microphone keypad

I Preparation

I Using the keypad

I Tuning step selection

I Lock functions

I Receiving

I Audio mute function

I Transmitting

I One-touch PTT function

I Accessing a repeater

I Subaudible tones

I Offset frequency

i reversed duplex mode

I Auto repeater

I General description

I Programming a memory channel

programming a memory channel via the microphone

I Transferring memory contents

memory operation

I Memory clearing

i programming channel names

I Memory bank selection

I Memory bank setting

I Transferring bank contents

I Call channel selection

I Programming a call channel

I Scan types

I Scan start/stop

I Scan edges programming

I Skip channel setting

I Scan resume condition

I Priority watch types

I Priority watch operation

I Programming a DTMF code

i transmitting a dtmf code

I DTMF speed

I Pocket beep operation

I Code programming

I Pager operation

other functions

I Initial set mode

i weather channel operation

i microphone keys

I Partial reset

I Data cloning

I Troubleshooting

i fuse replacement

I Optional unit installation

specifications and options

mode arrangement

ANI FUNCTION

Preparation

Operation

voice scrambler