Icom IC-V8000 Instruction Manual

Also see for IC-V8000: Service manual Instruction manual Service manual Optional instructions

296 MEMORY OPERATION[EXAMPLE]: Clearing memory channel 20.Push to select VFO. Rotate for selecting memory channel.Push momentarily.V/MHzSCAN S.MWMWPush any switch.Push briefly, then push again for 1 sec.S.MWMW S.MWMWBeepBeepBeep“““““ Memory clearingContents of programmed memories can be cleared (blanked),if desired.q Push [V/MHz(SCAN)] to select VFO mode.w Push [MW(S.MW)] momentarily.• “M” indicator and the memory channel number blink.e Rotate the tuning dial to select the memory channel to becleared.• Memory channels not yet programmed are blank.r Push [MW(S.MW)] briefly, then push [MW(S.MW)] againfor 1 sec.• 3 beeps sound, then the frequency is cleared.• “M” indicator blinks continuously.• Scan edges, 1A/1b, 2A/2b, 3A/3b, and the call channel cannotbe cleared. This operation must be performed within 1.5 sec.t Push any switch, except [MW(S.MW)], to return to VFOmode.NOTE: Be careful!— the contents of cleared memoriesCANNOT be recalled.