72 INITIAL SETUPBASIC MANUAL■ Inserting a microSD card1. Turn OFF the transceiver.2. Lift OFF the [micro SD] slot cover on the side panel.3. With the terminals facing the front, insert the card intothe slot until it locks in place and makes a ‘click’ sound.L DO NOT touch the terminals.NOTE: When removing, push in the microSD carduntil a ‘click’ sounds. The card is unlocked, and youcan pull it out.DO NOT remove the card from the transceiver whilethe card is being accessed. Otherwise, the card datamay be corrupted or deleted.4. Completely close the [micro SD] slot cover.■ Turning ON the transceiverz Hold down [ ] for 1 second to turn ON the transceiver.• A beep sounds.• After the opening message and power source voltage areis displayed, the operating frequency or repeater name isdisplayed.z Hold down [ ] for 1 second again to turn OFF the power.■ Adjusting an audio levelRotate [VOL] to adjust an audio level.L The display shows the volume level while adjusting.[microSD] slotSlot covermicroSD cardTerminals facingthe frontCAUTION: DO NOTforcibly or inversely insertthe card. It will damage thecard or the slot.