Icom ID-31E PLUS Basic Manual

Also see for ID-31A PLUS: Manual Manual Advanced manual

Contents

Icom ID-31E PLUS Basic Manual Manual pdf 60 page image

47D-STAR GUIDED-STAR OPERATIONAfter you receive a signal, the calling station’s call sign canbe captured by holding down the Call Sign Capture key([RX→CS]) for 1 second. After releasing, you can quicklyand easily reply to the call.What is the Call Sign Capture key?Holding down the Call Sign Capture key for 1 secondsets the last received station’s call sign as a temporarydestination, and makes replying quick and easy.Step 1: Set the received call sign to “TO” (Destination).While receiving, hold down [RX→CS] for 1 second.• After releasing the key, the transceiver announces the station callsign and the call sign is captured.InformationL• If you want to select another call sign in the RX History, rotate[DIAL] while holding down [RX→CS].• You can change the setting of the [RX→CS] key on the MENUscreen. If [RX→CS] Key is set to “RX > CS List,” the received callsign is not captured. The RX History list is displayed instead.(MENU > DV Set > [RX>CS] Key)• When a received signal is weak, or during a DV scan, the call signmay not be correctly received. In that case, you cannot capturethe call sign.• When RX > CS SPEECH is set to “OFF,” the transceiver does notannounce the call sign.(MENU > SPEECH > RX > CS SPEECH)Step 2: Hold down [PTT] to transmit.• The TX/RX indicator lights red while transmitting.L Push [RX→CS] to return to the previous call sign setting.■ Capturing a call signWhile holding down After releasing←Captured!