Icom ID-31E PLUS Basic Manual

Also see for ID-31A PLUS: Manual Manual Advanced manual

Contents

Icom ID-31E PLUS Basic Manual Manual pdf 64 page image

51D-STAR GUIDED-STAR OPERATIONThis section describes the simplex operation (through norepeater).NOTE: Depending on the transceiver's version,the frequencies may be different. Check for usablefrequencies for your operating area.What is a Simplex Call?A simplex call is a direct call to another station on a singlefrequency, not using a repeater.■ Making a Simplex callD In the VFO mode1. Push [V/MHz] to enter the VFO mode.2. Push [FM/DV] to set the operating mode to DV.3. Rotate [DIAL] to set the operating frequency. (p. 15)4. Hold down [LOW] for 1 second to set an output power.InformationL• You can select S-LOW, LOW 1, LOW 2, MID, or HIGH eachtime you hold down [LOW] for 1 second.• You can also select an output power by rotating [DIAL] whileholding down [LOW].• When you select a high power, the power icon disappears.• Select a level to suit your operating requirements.5. Hold down [PTT] to transmit, and speak into themicrophone at your normal voice level.• The TX/RX indicator lights red.• The S/RF meter displays the output power level.6. Release [PTT] to receive.TIP: If you enter a DV simplex frequency to a Memorychannel, you can also make a simplex call in the Memorymode. See page 21 on how to enter Memory channels.