Icom ID-31E PLUS Basic Manual

Also see for ID-31A PLUS: Manual Manual Advanced manual

Contents

Icom ID-31E PLUS Basic Manual Manual pdf 74 page image

61D-STAR GUIDED-STAR OPERATION■ “TO” (Destination) settingTo make a Gateway CQ call:Select a repeater from therepeater list, if you want to makea Gateway call.Set by rotating [DIAL]:Rotate [DIAL] to select a repeater or Your Call Sign thatis displayed on the DR screen. (This operation is disabledwhen “CQCQCQ” is set.)To make a Local Area CQ call:Set “CQCQCQ” in “TO”(Destination).To make a call to a specificstation:Select the station call sign in theYour Call Sign.TIP: After you receive the individual station or repeater’ssignal, the call sign can be captured by holding down theCall Sign Capture key ([RX>CS]), and you can quicklyand easily reply to a call.To make a call through areflector:Select a reflector that isconnected to the repeater youwant to call through.To select from RX History:When you receive a call, thecaller station data is saved inRX History. You can select thedestination from the record.To select from TX History:When you make a call, thedestination repeater or calledstation data is saved in TXHistory. You can select thedestination from the record.To directly enter thedestination station call sign:Directly enter the destinationstation’s call sign. To directly enter thedestination repeater call sign:Directly enter the destinationrepeater’s call sign.