Icom ID-31E PLUS Basic Manual

Also see for ID-31A PLUS: Manual Manual Advanced manual

Contents

Icom ID-31E PLUS Basic Manual Manual pdf 69 page image

56D-STAR GUIDED-STAR OPERATIOND Reflector Echo TestingTo confirm that your signal is correctly getting into therepeater, you can transmit a short message as a trial.After releasing [PTT], your message will be played back.1. Push [RX→CS] to select “TO,” then push [ENT].• Displays the TO SELECT screen.2. Select “Reflector.”• Displays the REFLECTOR screen.3. Select “Echo Test.”• Returns to the DR screen, and “Echo Test” and “E” aredisplayed in “TO.”4. Hold down [PTT] and speak into the microphone.• The TX/RX indicator lights red while transmitting.5. Release [PTT] to hear your message.D Requesting repeater informationWhen you send the repeater information command, an IDmessage is sent back.1. Push [RX→CS] to select “TO,” then push [ENT].• Displays the TO SELECT screen.2. Select “Reflector.”• Displays the REFLECTOR screen.3. Select “Repeater Information.”• Returns to the DR screen, and “Repeater Information” and “I”are displayed in “TO.”4. Hold down [PTT] to transmit the repeater informationcommand.• The TX/RX indicator lights red while transmitting.5. Release [PTT] to hear the repeater ID message.[ENT][Down][Up] [ENT][Down][Up]