50D-STAR GUIDED-STAR OPERATIONYou can make a call to an individual station when the stationcall sign is selected in “TO” (Destination).When you call an individual station through a gateway, yourcall is automatically sent to the last repeater that the stationaccessed. So, even if you don’t know where the station is,you can make a call using Call Sign Routing.Step 1: Set “FROM” (Access repeater)L Same as described in page 48.Step 2: Set “TO” (Destination)1. Push [RX→CS] to select “TO,” then push [ENT].2. Select “Your Call Sign.”■ Calling an individual station[ENT][Down][Up]3. Select your destination station.• Returns to the DR screen, and the selected station name isdisplayed in “TO.”Step 3: Hold down [PTT] to transmit.• The TX/RX indicator lights red while transmitting.( Example: The destinationstation is set to “Rick.”)
