KERN CCS 6K-6 Operating Manual

Also see for CCS 10K-6: Operating instructions

Contents

CFS/CCS-BA-e-1825 173 Basic instructions3.1 Proper useThe balance / counting system you purchased is intended to determine theweighing value of material to be weighed. It is intended to be used as a “non-automatic balance”, i.e. the material to be weighed is manually and carefully placedin the centre of the weighing pan.. As soon as a stable weighing value is reachedthe weighing value can be read.3.2 Improper UseDo not use balance / counting system for dynamic weighing. In the event that smallquantities are removed or added to the material to be weighed, incorrect weighingresults can be displayed due to the “stability compensation“. (Example: Slowlydraining fluids from a container on the balance.)Do not leave permanent load on the weighing pan. This may damage the measuringsystem.Impacts and overloading exceeding the stated maximum load (max) of the balance /counting system, minus a possibly existing tare load, must be strictly avoided.Balance may be damage by this.Never operate balance / counting system in explosive environment. The serialversion is not explosion protected.The structure of the balance may not be modified. This may lead to incorrectweighing results, safety-related faults and destruction of the balance.The scale / the counting system may only be used according to the describedpreconditions. Other areas of use must be released by KERN in writing.3.3 WarrantyWarranty claims shall be voided in case• Our conditions in the operation manual are ignored• The appliance is used outside the described uses• The appliance is modified or opened• Mechanical damage or damage by media, liquids, natural wear and tear• The appliance is improperly set up or incorrectly electrically connected• The measuring system is overloaded