KERN CCS 6K-6 Operating Manual

Also see for CCS 10K-6: Operating instructions

Contents

68 CFS/CCS-BA-e-1825 Use the numeric keys to input password „9999“:Confirm input by . „Pin“ „----„ Select bulk material or reference balance via .The appeared [] displays the current balance.When using as counting system, the bulk materialbalance as well as the reference balance must beadjusted. The adjustment process must be carried outon both balances. Acknowledge with .„tECH“ „LoCAL“„tECH“ „rEmotE“ Using select the weighing unit [kg or lb] which willbe used for linearization. The appeared [] displays thecurrent weighing unit. Acknowledge with .„tECH“ „Unit“ Ensure that there are no objects on the weighing pan.Wait for stability display (indicator [] atopappears), then press . Carefully place first adjustment weight into the center ofthe weighing plate on display „LoAd 1“.Wait for stability display, then press . Carefully place second adjustment weight into thecenter of the weighing plate on display „LoAd 2“.Wait for stability display, then press . When „LoAd 3“ is displayed, place the third adjustmentweight carefully in the centre of the weighing plate.Wait for stability display, then press . After the adjustment the balance will carry out a self-test. The balance returns automatically into weighingmode. In case of an adjustment error or incorrectadjusting weight the display will show an error message( ), repeat adjustment process.