38 CFS/CCS-BA-e-18259.2 Tolerance check for target quantity Press , the active tolerance weighing mode is indicated. If needed, select tolerance control for target weight (PSt nEt) withor (models CFS 50K-3).Display example model CFS 6K0.1: Press the TARE key , which shows the currently set upper threshold. To change, input the desired value, e.g. 100 pieces, with the numeric keys. Confirm with TARE key; the currently adjusted minimum threshold will bedisplayed. To change, input the desired value, e.g. 90 pieces, with the numeric keys. Confirm with TARE key, the tolerance control will start.The indicator above appears.
