CFS/CCS-BA-e-1825 8319 Instant helpIn case of an error in the program process, briefly turn off the balance anddisconnect from power supply. The weighing process must then be restarted fromthe beginning.Fault Possible causeThe displayed weight doesnot glow. • The balance is not switched on.• The mains supply connection has been interrupted(mains cable not plugged in/faulty).• Power supply interrupted.The displayed weight ispermanently changing • Draught/air movement• Table/floor vibrations• Weighing pan has contact with other objects.• Electromagnetic fields / static charging (choosedifferent location/switch off interfering device ifpossible)The weighing result isobviously incorrect • The display of the balance is not at zero• Adjustment is no longer correct.• The balance is on an uneven surface.• Great fluctuations in temperature.• Warm-up time was ignored.• Electromagnetic fields / static charging (choosedifferent location/switch off interfering device ifpossible)