CFS/CCS-BA-e-1825 359 Fill-to-target functionThe balance allows weighing of goods to a certain target weight or target piecenumber within defined tolerances. With this function one can also check if theweighing good is within a defined tolerance range. Tolerance control is possible inweighing or target mode.Reaching the target value is indicated by an acoustic (if activated in menu) and anoptic signal (tolerance mark ).Audio signal:The acoustic signal is dependent of the adjustment in the menu block„F1 oFFBEEP“.Options:bEEP off Acoustic signal turned offbEEP on in Acoustic signal sounds if the weighted piece is within the giventolerancebEEP on out Acoustic signal sounds if the weighted piece is outside thegiven toleranceOptical signal:The tolerance marker provides the following information:Target number /target weight exceeds given toleranceTarget number /target weight within given toleranceTarget number /target weight below given tolerance
