70 CFS/CCS-BA-e-182517 RS 232C interfaceThe balance is typically equipped with a RS 232C interface. The weighing data canbe output depending on the setting in the menu either automatically or by pressingor (in CFS 50K-3) via the interface.This data exchange is asynchronous using ASCII - Code.The following conditions must be met to provide successful communication betweenthe weighing balance and the printer.• Use a suitable cable to connect the weighing balance to the interface of theprinter. Faultless operation requires an adequate KERN interface cable.• Communication parameters (baud rate, bits and parity) of balance and printermust match. Detailed description of the interface parameters see chap. 12.2,Menu block " ".17.1 Technical dataConnection 9 pin d-subminiature bushingPin 2 inputPin 3 outputPin 5 signal earthBaud rate 600/1200/2400/4800/9600Parity 8 bits, no parity / 7 bits, even parity / 7 bits, odd paritybold printed = factory setting
