CFS/CCS-BA-e-1825 237 Basic Operation7.1 Switching on/off Actuate power switch (cf. chapter 2) at the right bottom of the scale to the front.The balance will carry out a self-test As soon as the weight display appears, thebalance is ready for weighing. To switch-off push backward the switch-on/switch-out on the right lower side ofthe balance.7.2 ZeroingResetting to zero corrects the influence of light soiling on the weighing plate. Theresetting range of the balance was adjusted to ± 2% max. by factory.Further adjustments are possible in the menu, see chapter 12.When using as counting system the zeroing range of both balances can be set inthe menu, see chapter 13.Manual Unload the balance Press , the balance starts resetting to zero.The [] symbol over a appears.AutomaticIn the menu the automatic zero point correction can be switched off or the amountcan be changed, see chapter 13.7.3 Switching over reference scale bulk scales if used as counting systemFor piece counting a platform can be connected via the second balance interface. Inthe counting system KERN CCS the quantity counting is made on the bulk materialbalance KERN KFP. The reference balance KERN CFS permits due to its highresolution a very precise determination of the average piece weight.The second balance can be operated in the same manner like the first balance.By pressing the display changes from one to the other balance.In the display appears or .The appeared [] displays the active balance.