KERN CCS 6K-6 Operating Manual

Also see for CCS 10K-6: Operating instructions

Contents

40 CFS/CCS-BA-e-182510 TotalizationTolerance control is possible in weighing or target mode.When using in the counting system, no matter, if the weighed goods are on thereference or on the bulk material balance.Preparing: When using as counting system select using the balance, on which will betotalized. The appeared [] displays the current balance. When totalizing in counting mode set the average piece weight.(see chap. 8.1 or 8.2) If necessary, tare the empty balance container.10.1 Manual totalizingWith this function the individual weighing values are added into the summationmemory by pressing and edited, when an optional printer is connected.• Menu settings:„F1 off“  „ACC“  „ON“ (unavailable in model CFS 50K-3)„F2 Prt“  „P mode“  „Print“  „Au OFF“ (cf. chapter 12.2)• When using as counting system there can be totalized on the reference aswell as on the bulk material balance.Before the totalizing process select the active balance, see chap. 7.3.Add up: Place weighing goods A.Wait until stability display is displayed, then press or (models CFS50K-3). The weight value or number will be stored and be output if connected toan optional printer. Remove the weighed good. More weighed goods can only be added when thedisplay ≤ zero. Place goods to be weighed B.Wait until stability display is displayed, then press or (models CFS50K-3). The weight value or the number of items are added in the summationmemory and printed out. Total weight, number of weighing procedures as well astotal parts counting appear 2 sec. Add more weighed goods as described before. Please note that the balance mustbe unloaded between the individual weighing procedures.