Kampmann Venkon Series Assembly, Installation And Operating Instructions

Also see for Venkon Series: Assembly, installation and operating instructions

Contents

Kampmann Venkon Series Assembly, Installation And Operating Instructions Manual pdf 76 page image

VenkonAssembly, installation and operating instructions7612 List of KaControl parameters12.1 Venkon parameter listParameter Function Standard Min. Max. Unit Venkon 2P000 Software version 24 0 255 - 24P001 Base setpoint for setpoint entry ± 3K 22 8 32 °C 22P002 Switching on / off hysteresis for valves 3 0 255 K/10 1P003 Neutral zone in a 4-pipe system (only in automatic mode) 3 0 255 K/10 3P004 Cooling without fan assistance (natural convection) 0 0 255 K/10 0P005 Heating without fan assistance (natural convection) 5 0 255 K/10 3P006 Fan On/Off hysteresis (only in ventilation mode) 5 0 255 K/10 5P007 P-band for heating 20 0 100 K/10 17P008 P-band for cooling 20 0 100 K/10 20P009 Offset to the base setpoint for setpoint input ± 3K 3 0 10 C 3P010 Clip-on sensor: Limit temperature to activate fan stages 1and 2 in heating mode 26 0 255 °C 26P011 Clip-on sensor: Limit temperature to activate fan stages 3and 4 in heating mode 28 0 255 °C 28P012 Clip-on sensor: Limit temperature to activate fan stage 5 inheating mode 30 0 255 °C 30P013 Clip-on sensor: Hysteresis for limit temperaturesP010, P011, P012, P014 10 0 255 K/10 10P014 Clip-on sensor: limit value temperature to activate the fanstages in cooling mode 18 0 255 °C 18P015 Function of input AI1 0 0 19 - 0P016 Function of input AI2 0 0 19 - 0P017 Function of input AI3 0 0 9 - 0P018 Raise temperature of cooling setpoint in Eco mode 30 0 255 K/10 30P019 Lower temperature of heating setpoint in Eco mode 30 0 255 K/10 30P020 ADC limit coefficient 6 0 15 - 6P021 ADC average coefficient 6 0 15 - 6P022 Activation/disabling of sun symbol in Comfort mode 0 0 1 - 0P023 Difference for compensation during cooling 0 -99 127 K/10 0P024 Coefficient for compensation during heating 0 -20 20 1/10 0P025 Difference for compensation during heating 0 -99 127 K/10 0P026 Coefficient for compensation during heating 0 -20 20 1/10 0P027 Fan setting: maximum run-time for manual fan mode 0 0 255 min 0P028 Flushing function: fan stage during the flushing function 2 1 5 - 2P029 Activation of continuous fan mode 0 0 1 - 0P030 Ventilate temperature activation 12 0 255 °C 12P031 Ventilation interval 27 0 255 °C 27P032 Flushing function: maximum idle time of fan 15 0 255 min 15P033 Flushing function: duration of flushing function 120 0 255 s 120P034 Flushing function: activation in operating modes 0 0 3 - 02 Parameter key Venkon SAP no. 9000816, dated 1.02.2018