— 12 —EnglishTuner features (See page 6)Selecting Tuning ModeYou can choose from three tuning modes: auto seek, presetstation seek, and manual. The “AUTO1” indicator lights upwhen auto seek tuning is selected, and the “AUTO2” indicatorlights when preset station seek tuning is selected.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the tuning functionappears in the display.Press the 4 button to search in the other direction.The tuning method is displayed as ”AUTO1“, ”AUTO2“, or”MANUAL“ referring respectively to auto seek tuning, presetstation seek tuning, and manual tuning.Switching settingsPress either the AM button or FM button to switch the tuningmode.The display and setting will change.Press the MENU button to end the menu mode.4321TuningPress the SRC button repeatedly until tuner mode is obtained."TUNER" is displayed when the tuner mode has been selected.Press either the FM or AM button to select the band.Each time you press the FM button, the band switchesbetween the FM1, FM2 and FM3.Press the AM button to select the MW and LW bands.• Auto Seek TuningPress the ¢ button to seek increasing frequencies.Press the 4 button to seek decreasing frequencies.• Preset station seek tuningPress the ¢ button to move to the next preset station (i.e.,the one with the next highest number), and the 4 button tomove to the last preset station (i.e., the one with the nextlowest number).If the frequencies stored at the preset numbers receivestations which were not originally memorized when travelinglong distances, the preset number is not displayed. In suchcases, pressing the 4/¢ button to use preset stationseek will receive channel 1.• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.The ST indicator lights up when stereo broadcasts are beingreceived.NOTENOTE321