Kenwood KDC-6060R Instruction Manual

Also see for KDC-5060R: Instruction manual

EnglishConnecting Cables to TerminalsTEL MUTEP.CONT.OUT1234567812345678Rear right output (Red)Rear left output (White)KENWOOD disc changer/DAB control inputBattery cable (Yellow)Ignition cable (Red)FM/AM antenna input Antenna Cord (ISO)Antenna Conversion Adaptor (ISO–JASO) (Accessory4)To connect the Disc changer or DAB unit, consult each manual.NOTEWiring harness(Accessory1)If no connections are made, donot let the cable come out fromthe tab.Power control/ Motor antennacontrol cable (Blue/White) Connect either to the power control terminalwhen using the optional power amplifier, or tothe antenna control terminal in the vehicle.A–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuseConnector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–6A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteOrange/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlDimmerIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right ( +)Front Right ( –)Front Left ( +)Front Left ( –)Rear Left ( +)Rear Left ( –) Connect to the terminal that is grounded wheneither the telephone rings or duringconversation.TEL mute cable (Brown)To connect the KENWOOD navigationsystem, consult your navigation manual.NOTE— 38 —