Kenwood KDC-6060R Instruction Manual

Also see for KDC-5060R: Instruction manual

— 19 —News Bulletin Functionwith PTY News Timeout SettingYou can arrange to have news bulletins interrupt your currentlistening source, including other radio stations. When theNews Bulletin function is on, the PTY News Timeout settingallows you to set the interval during which further newsinterruption cannot take place. You can adjust the PTY newsinterruption period from 10 to 90 minutes for each journey.Turning News Bulletin Function On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the News Bulletinfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "NEWS OFF" or "NEWS##M" in the display, indicating that the function is on or off,respectively.Depending on the interval chosen, the "##M" in the display willchange when the function is turned on.Changing the Function SettingPress either the FM or AM button.Each time you press the FM or AM button until the desiredsetting is displayed.Press the FM button to increase the interval, and the AMbutton to decrease it.OFF Ö 00M Ö 10M Ö 20M Ö 30M Ö 40M Ö 50M Ö 60MÖ 70M Ö 80M Ö 90M (M= minutes)When you select the news interruption timeout interval, theNews function turns on and the NEWS indicator lights up.When a news bulletin is received, the NEWS indicator will blinkand reception will begin at the preset volume.3NOTE21If you choose the "20M" setting, further news bulletins will not bereceived for 20 minutes once the first news bulletin is received.Setting the interval at the "00M" factory default indicates noNews Timeout will be made, meaning that additional newsbulletins will continue to be searched for.Press the MENU button to end the menu mode.• This function is only available if the desired station sends PTY-code for news bulletin or belongs to EON-Network sendingPTY-code for news bulletin.• If you turn on the news bulletin function in the MW/LW band,the band is switched automatically to the FM band.However, the MW/LW band is not returned to when you turnoff the function.NOTE4NOTE