Kenwood KDC-6060R Instruction Manual

Also see for KDC-5060R: Instruction manual

— 14 —EnglishTuner features (See page 6)Auto Memory EntryYou can automatically store all the receivable frequencies inthe band currently being listened to, and then recall them withthe touch of a button later. This function is especially usefulwhen you are travelling and do not know what stations areavailable. Up to 6 frequencies can be stored this way.Select the band for auto memory entry.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until "A-MEMORY" appears inthe display.Press the 4 button to search in the other direction.Hold down either the AM button or FM button for two secondsor more to start auto memory function.The numbers of the preset station buttons showed in order.When all the stations in a certain band are stored in the presetmemory, the auto memory entry stops. The tuner then playsthe last station received.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.• When the AF function is turned on whilst auto memory entrytakes place, only RDS stations (i.e., stations with RDScapability) are stored. RDS stations that have been preset forFM1 cannot also be preset in FM2 or FM3.• When the local seek function is turned whilst auto memoryentry takes place, stations with poor reception are not stored.• When the Traffic Information function is on , only the localtraffic information station frequency will be stored.Cancelling Auto Memory Entry During Its Operation:Press the MENU button whilst auto memory entry is takingplace to stop the process.NOTE4321Direct Access TuningWhen you already know the frequency of the station that youwant to listen to, you can enter it directly for quick access.(Function of remote control)Select the band by pressing the FM or AM button.Press the DIRECT button.The frequency part of the display blinks for 10 seconds.If you make no input in the 10-second period, direct accesstuning is automatically cancelled.Enter the frequency of the desired station whilst the display isblinking.If you want to listen to an FM station at 92.1 MHz, forexample, press 0, 9, 2, and 1.If you want to listen to an AM station at 810 kHz, for example,press 0, 8, 1, and 0.• When a frequency which cannot be received is input, thisfrequency is not verified and operation returns to the originalfrequency input mode.• FM frequencies can only be input in 0.1 MHz steps, and not in0.01 steps.Cancelling Direct Access Tuning:Press the DIRECT button again.NOTE321Function of remote control with number/letter entry buttons(See page 8)