Kenwood KDC-6060R Instruction Manual

Also see for KDC-5060R: Instruction manual

— 42 —EnglishSOLUTIONPOSSIBLE CAUSEPROBLEMA CD ejects as soon as it isloaded.The CD is upside-down. Load the CD with the labelled side up.The CD is quite dirty. Clean the CD, referring to the section on "Cleaning CDs" (seepage 5).The sound skips on a CD. The CD is scratched or dirty. Clean the CD, referring to the section on "Cleaning CDs" (seepage 5).The specified track does notplay.Random play has been selected. Turn off the random play function.Troubleshooting GuideDisc Control modeSOLUTIONPOSSIBLE CAUSEPROBLEMThe computer chip in the unit is not functioning normally. Press the reset button on the unit (see page 4).The disc control mode cannotbe selected.No cable has been connected to the disc changer inputterminal on the unit.Connect the cable to the disc changer input terminal on theunit.The specified disc does notplay, but another one playsinstead.The specified CD is very dirty. Clean the CD.The CD is upside-down. Load the CD with the labelled side up.The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for thespecified disc.The disc is severely scratched. Try another disc instead.The sound skips. Something is touching the disc changer. Remove whatever is touching it.The CD is scratched or dirty. If skipping happens at the same place when the car isstopped, something is wrong with the CD. Clean the CD.The display shows that thechanger is being played, but nosound can be heard.The specified track does notplay.Random play or magazine random play has been selected. Turn off the random play or magazine random play function.

/ 45

Related manuals for Kenwood KDC-5060R