— 17 —Restricting RDS Region (Region Restrict Function)You can choose whether or not to restrict the RDS channels,received with the AF function for a particular network, to aspecific region. When the Region Restrict Function is on, theregion is restricted and the REG indicator is turned on.Turning Region Restrict Function On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Region restrictfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "REG ON" or "REG OFF" inthe display, indicating that the function is on or off,respectively.Switching settingsPress either the AM button or FM button.The display and setting will change.Press the MENU button to end the menu mode.Sometimes stations in the same network broadcast differentprogrammes or use different programme service names.NOTE4321Traffic Information FunctionYou can listen to traffic information. If you are listening totapes or discs, they will continue playing until a traffic bulletinis broadcast.Turning TI function On/Off:Press the TI button to turn the function on and off.When the function is on, the TI indicator is turned on.When a traffic information station is being received, the TPindicator will turn on. When none is being received, the TIindicator will blink on and off.When a traffic bulletin begins to be broadcast, the TA indicatorwill turn on, and reception will begin at the preset volume.If you are listening to a tape or disc when a traffic bulletinbegins, they will automatically be turned off. When the bulletinends or poor reception is experienced, the tape or disc willbegin playing again.Pressing the TI button whilst in the MW/LW band automaticallyswitches reception to the FM band. However, the MW/LW band isnot returned to when the TI button is pressed again.Switching to a Different Traffic Information Station:Use the 4 / ¢ buttons to make an auto seek of the TIstations in a certain band.• When you are listening to a tape or disc, you cannot change toanother TI station.• When the auto TP seek function is turned on and receptionstarts to weaken, the tuner automatically seeks stations withbetter reception.• If you are tuned to a station that is not a traffic informationstation itself but which provides EON services, you can still havetraffic information received.• Holding the TI button down for one second or more when the TIfunction is on in the disc control mode results in a change to thefrequency display of the traffic information station for fiveseconds.NOTENOTE