— 27 —Direct Track SearchUsing the remote control, make direct input of the tracknumber that you want to listen to.Using the numeric buttons on the remote control, enter thenumber of the track that you want to listen to.The selected track number blinks in the display for 10 seconds.If you make no further input in the 10-second period, thenumber entry mode will automatically be cancelled.Press either the TRACK + or TRACK – button whilst the tracknumber is blinking.The track specified in step 1 starts playing.Cancelling Direct Track Search During Its Operation:Press the 38 button.You cannot use the direct track search function whilst doing trackor disc scans or using random or magazine-random play.NOTE21Direct Disc SearchUsing the remote control, make direct input of the discnumber that you want to listen to.Using the numeric buttons on the remote control, enter thenumber of the disc that you want to listen to.The selected disc number blinks in the display for 10 seconds.If you make no further input in the 10-second period, thenumber entry mode will automatically be cancelled.• Input "0" to select disc #10.• If you enter more than two numbers all at once, a search will bemade only of the last number entered.Press either the DISC + or DISC – button whilst the numberinputted is blinking.The disc specified in step 1 starts playing.Cancelling Direct Disc Search During Its Operation:Press the 38 button.2NOTE1Function of disc changers with remote control havingnumber/letter entry buttons (See page 8)Function of remote control with number/letter entry buttons(See page 8)