NEC Image P100E Series Manual

Also see for IMAGE P100E - SERVICE: Service manual

Contents

Setting System Parameters 3-3HOW TO START SETUPTo start the Setup utility, follow these steps:1. Turn on or reboot your system. Setup briefly displaysthe following message at the bottom left of the screen:F2 to run SETUP2. Press F2 twice as soon as the message is displayed, as itappears only briefly. Setup’s Main menu appears similarto the following screen.NOTE: The screen shown is typical of your system.The actual items on the Main menu depend uponthe hardware installed in your system.Main menuPhoenixBIOS Setup — Copyright 1985-94 Phoenix Technologies Ltd.Main Advanced Security ExitSystem Time: [10 :19:20] Item Specific HelpSystem Date: [1/27/1995]Diskette A: [1.44 MB, 3 ½"] , , orDiskette B: [Not Installed] selects field.> IDE Adapter 0 Master: C: 540 Mb> IDE Adapter 0 Slave: None> IDE Adapter 1 Master: None> IDE Adapter 1 Slave: NoneVideo System: [EGA/VGA]> Memory Cache:> Memory Shadow: [Enabled]> Boot sequence: [A: then C:]> Numlock: [Auto]System Memory: 640 KBExtended Memory: 7 MBF1 Help ↑↓ Select Item -/+ Change Values F9 Setup DefaultsESC Exit ←→ Select Menu Enter Select > Sub-Menu F10 Previous Values