NEC PX1005QL-W User Manual

Also see for PX1005QL-B: User manual

1045. Using On-Screen M enuTo call up the adjusted values from [LENS MEMORY]:1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button.The confirmation screen will be displayed.2. Press the ◀ button to select and [YES] and press the ENTER button.During projection, if the adjusted values for an input signal have been saved, the lens will shift. If not, the lens willshift according to the adjusted values stored in the selected [REF. LENS MEMORY] [PROFILE] number.To automatically apply the adjusted values at the time of source selection:1. From the menu, select [SETUP] → [INSTALLATION(2)] → [REF. LENS MEMORY] → [LOAD BY SIGNAL] andpress the ENTER button.2. Press the ▼ button to select and [ON] and press the ENTER button.This will move the lens automatically to the position at the time of source selection according to the adjustedvalues.NOTE:• The Lens Memory function may not produce a completely aligned image (due to tolerances in the lenses) using the adjustedvalues stored in the projector. After calling up and applying the adjusted values from the Lens Memory function, finely adjust thelens shift, zoom and focus to produce the best possible image.