NEC PX1005QL-W User Manual
Also see for PX1005QL-B: User manual
                                                                                                                                                                                                           |
1225. Using On-Screen M enuPROGRAM TIMERThis option turns on/standby the projector and changes video signals, and selects LIGHT mode automatically at aspecified time.NOTE:• Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (→ page 125)Make sure that the projector is in the standby condition with the POWER cord connected.The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the mainpower is not supplied to the projector for two weeks or more, it requires to set [DATE AND TIME SETTINGS] feature again.Setting a new program timer1. On the PROGRAM TIMER screen, use the ▲ or ▼ button to select [SETTINGS] and press the ENTER button.The [PROGRAM LIST] screen will be displayed.2. Select a blank program number and press the ENTER button.The [ (EDIT)] screen will be displayed.3. Make settings for each item as required.ACTIVE ������������������ Place a check mark to enable the program� |
Related manuals for NEC PX1005QL-B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine