NEC PX1005QL-W User Manual

Also see for PX1005QL-B: User manual

1798. AppendixLIGHT IndicatorIndicator display Projector status ProcedureOff The light module is turnedoff.–Flashing Red (six timesper cycle)The light source is notturned on.Wait for over 1 minute and try to power ON the projector again.If the problem still persists, contact the NEC projector customersupport center.Lit Green Light module lit –TEMP. IndicatorIndicator display Projector status ProcedureOff No problemFlashing Red (cyclesof 2)Temperature problem The temperature protector has been activated. If the roomtemperature is high, move the projector to a cool place. If theproblem still persists, contact the NEC projector customer sup-port center.Lit Orange High surrounding tempera-ture (Forced ECO Mode)The surrounding temperature is high. Lower the room tempera-ture.If the temperature protector is activatedIf the projector’s internal temperature rises abnormally, the light module turns off and the temperature indicator flashes(repeatedly two flashes per cycle).It may happen that the projector’s temperature protector is simultaneously activated and the projector’s power turns off.If this happens, do the following:- Unplug the power cord from the power outlet.- If using in a place where the surrounding temperature is high, move the projector to a different, cool place.- If there is dust in the ventilation slits, clean. (→ page 160)- Wait as such about 1 hour for the projector’s internal temperature to lower.