NEC PX1005QL-W User Manual
Also see for PX1005QL-B: User manual
                                                                                                                                                                                                           |
1345. Using On-Screen M enu[SOURCE OPTIONS]Setting Auto Adjust [AUTO ADJUST]This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted fornoise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].OFF ������������������������ The computer signal will not be automatically adjusted� You can manually optimize the computer signal�NORMAL���������������� Default setting� The computer signal will be automatically adjusted� Normally select this option�FINE ����������������������� Select this option if fine adjustment is needed� It takes more time to switch to the source than when [NOR-MAL]is selected�TIP:• The default setting when shipped from the factory is [NORMAL].• When the AUTO ADJ. button is pressed, the same [FINE] adjustment is carried out.[COLOR SYSTEM]This feature allows you to select the TV video signal, which differs from country to country (NTSC, PAL, etc.).This is set to [AUTO] by factory default. Set this if the projector cannot identify the signal automatically.Selecting Default Source [DEFAULT INPUT SELECT]You can set the projector to default to any one of its inputs each time the projector is turned on.LAST ���������������������� Set the projector to default to the previous or last active input each time the projector is turned on�AUTO ��������������������� Search for an active source in order of HDMI → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMPUTER→ HDBaseT → SLOT and displays the first found source�HDMI ��������������������� Display the digital source from the HDMI IN terminal every time the projector is turned on�DisplayPort ������������ Display the digital source from the DisplayPort IN terminal every time the projector is turned on�BNC ����������������������� Project the input signal from the BNC IN terminalBNC(CV) ���������������� Project the input signal from the BNC(CV) input terminal�BNC(Y/C) ��������������� Project the input signal from the BNC(Y/C) input terminal�COMPUTER ����������� Display the computer signal from the COMPUTER IN terminal every time the projector is turned on�HDBaseT ���������������� Project the HDBaseT or WIRED LAN signal�SLOT���������������������� Project the picture via the optional board (sold separately) inserted into the SLOT� |
Related manuals for NEC PX1005QL-B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine