NEC PX1005QL-W User Manual

Also see for PX1005QL-B: User manual

373. Convenient Features❹ Shift the On-Screen Menu displaying position1. Press the MENU button.The On-Screen Menu will be displayed on.2. Move the cursor by the ▶ button to the [SETUP] and then press the ENTER button.The cursor will move to the [MENU1].3. Move the cursor by the ▶ button to the [MENU2].4. Move the cursor by the ▼ button to the [MENU POSITION] and then press the ENTER.The On-Screen Menu will goes into the MENU POSITION setup screen.5. Move the cursor either TO [HORIZONTAL POSITION] or [VERTICAL POSITION] by pressing ▼ or ▲ buttonand then press ◀/▶ button to shift the On-Screen Menu.For finishing the setting on the On-Screen Menu, press the MENU button on the remote control.TIP:• Once the projector is powered off, the On-Screen Menu displaying position will be reset to the default factory setting position.• This function does not influence to the display position of input terminal information and message.❺ Freezing a PictureHold the CTL button and press the PIP/FREEZE button to freeze a picture.Press again to resume motion.NOTE: The image is frozen but the original video is still playing ahead.