NEC PX1005QL-W User Manual
Also see for PX1005QL-B: User manual
                                                                                                                                                                                                           |
272. Projecting an Image ( B asic Operation)Applicable lens unit: NP31ZL1. Focus on the projected image around the optical axis. (Powered focus)Press the FOCUS +/− button until you can obtain the best focus.(The FOCUS adjustment bar will be displayed on.)The drawing below shows an example when the projected image is shifted upward. In this case the optical axisis at the bottom edge of the projected image.Adjusting with buttons on the cabinetPress the FOCUS +/− BUTTON on the control panelAdjusting with the remote controlPress the VOL/FOCUS button holding the CTL button• ◀ or ▶ buttons on the cabinet or the remote control are also available to adjust FOCUS while the FOCUSadjustment bar is displayed on.Optical axis* When the lens is at the center position, the optical axis is at the center of the image. In this case, adjust thefocus at the center of the projected image. |
Related manuals for NEC PX1005QL-B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine