NEC PX1005QL-W User Manual

Also see for PX1005QL-B: User manual

1155. Using On-Screen M enu[3D CAUTION MESSAGE]This selects whether to display a caution message or not when switching to a 3D video.The default condition when shipped from the factory is ON.OFF �� The 3D caution message screen will not be displayed�ON �� The 3D caution message screen will be displayed when switching to a 3D video� Press the ENTER buttonto cancel the message�• The message will disappear automatically after 60 seconds or when other buttons are pressed. If it disap-pears automatically, the 3D caution message will be displayed again when switching to a 3D video�Selecting Menu Display Time [DISPLAY TIME]This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. Thepreset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is thefactory preset.[MENU(2)][MENU ANGLE]Select the direction for displaying the menu.[MENU POSITION]Shift the menu displaying position.HORISONTAL POSITION ��Shift the menu in the horizontal directions�VERTICAL POSITION ��Shift the menu in the vertical directions�RESET��Reset the menu displaying position to the default factory setting (the screen center)�TIP• Once the projector is powered off, the menu displaying position will reset to the default factory setting.• Input terminal and message displaying position are not influenced by the [MENU POSITION].