NEC PX1005QL-W User Manual

Also see for PX1005QL-B: User manual

342. Projecting an Image ( B asic Operation)❼ Turning off the Projector1. Press the (POWER) button on the projector cabinetor the POWER OFF button on the remote control.The [POWER OFF / ARE YOU SURE ? / CARBON SAV-INGS- SESSION 0.000[g-CO2]] message will appear.2. Press one among the ENTER, the (POWER), and thePOWER OFF button.When the projector is in STANDBY MODE, the POWERindicator lights up red. (When [STANDBY MODE] is in[NORMAL] setting)• If you do not want to turn off, select [NO] by ◀/▶buttonand press ENTER.3. Make sure the projector is in STANDBY MODE, then turnoff the main power switch (○ OFF)The POWER indicator will go off and the main power willturn off.• While the POWER indicator is blinking blue in shortcycles, the power cannot be turned off.Power OnSteady blue lightStandbySteady red lightCAUTION:Parts of the projector may temporarily overheat if the projector is turned off with the main power switch or the ACpower supply is disconnected while the projector is in operation or the cooling fan is running. Handle with care.