AppleTalk Setup 6-11n You can also set the range of EtherTalk Phase II networknumbers. Select Net Low and enter the lower limit of thenetwork number range. Select Net High and enter the upperlimit of the range.n Select the Seeding pop-up menu and choose the seedingmethod for Netopia to use.You have finished configuring EtherTalk Phase II.LocalTalkThe Netopia ISDN Router can function as a LocalTalk to EtherTalkrouter. This means that a LocalTalk network can be connected to theNetopia’s LocalTalk port. You can enable this feature by configuringthe Netopia’s LocalTalk port.Select LocalTalk Setup in the AppleTalk Setup screen and pressReturn to the LocalTalk Routing Setup screen.Netopia Corporate modelsLocalTalk Routing SetupLocalTalk Enabled: OnLocalTalk Zone Name: UnnamedLocalTalk Net Number: 0Seeding...: Soft-SeedingUse this screen to set up the LocalTalk Port Routing attributes.n If you are using LocalTalk with the Netopia ISDN Router, selectLocalTalk Enabled and make sure LocalTalk is set to On, whichis the default.
