Troubleshooting A-5n If you are using MacIP subnetting, make sure Transmit RIP isOn (see the IP Options screen).Configuration problemsIf you reconfigure the Netopia ISDN Router and the reconfiguredsettings do not seem to be taking effect, reset (restart) the system.You can reset the system by switching the Netopia ISDN Router offand back on.Resetting the system will cause new configuration settings to takeeffect.Internal termination switchNon-North Americanmodels onlyThe Netopia ISDN Router includes an internal termination switch forterminating the S/T bus. The S/T bus is the connection from theRouter to the NT1 or wall jack on your ISDN line. The S/T bus mustbe properly terminated to avoid ISDN communications errors.The Netopia ISDN Router ships with its internal termination switchset to the off position. This means that you should already have S/Tbus termination. If you are unsure of whether you have S/T bustermination, contact your ISDN service provider.If you do not have S/T bus termination, you should set the internaltermination switch to the on position.
