Utilities and Tests 10-19bytes transferred.To upload a configuration fileUsing TFTP, you can send a file containing a snapshot of theRouter’s current configuration to a TFTP server. The file can then bedownloaded by a different Netopia ISDN Router unit to configure itsparameters (see “To download a configuration file” on page 10-18).This is useful for configuring a number of Routers with identicalparameters, or just for creating configuration backup files.Uploading a file can also be useful for troubleshooting purposes.The uploaded configuration file can be tested on a different NetopiaISDN Router unit by Farallon or your network administrator.To upload a configuration file, follow these steps:1. Select TFTP Server Name and enter the DNS name or IPaddress of the TFTP server you will use. The DNS name or IPaddress is available from the site where the server is located.2. Select Config File Name and enter a name for the file you willupload. The file will appear with the name you choose on theTFTP server. You may need to enter a file path along with thefile name (for example, Mypc/Netopia/myfile).3. Select Write Config Now and press Return. Netopia will beginto transfer the file.4. The TFTP Transfer State item will change from Idle to WritingConfig. The TFTP Current Transfer Bytes item will reflect thenumber of bytes transferred.
