10-18 Netopia ISDN Router Reference Guidebytes transferred.To download a configuration fileThe Router can be configured by downloading a configuration fileusing TFTP. Once downloaded, the file reconfigures all of theRouter’s parameters as if someone had manually done so throughthe console port.To download a configuration file, follow these steps:n Select TFTP Server Name and enter the DNS name or IPaddress of the TFTP server you will use. The DNS name or IPaddress is available from the site where the server is located.n Select Config File Name and enter the name of the file you willdownload. The name of the file is available from the site wherethe server is located. You may need to enter a file path alongwith the file name (for example, bigroot/config/myfile).n Select Read Config Now and press Return. You will see thefollowing dialog box:+-----------------------------------------------------------++-----------------------------------------------------------+| || Are you sure you want to read the configuration now? || The device will reset when the transfer is complete. || || CANCEL CONTINUE || |+-----------------------------------------------------------+n Select CANCEL to exit without downloading the file, or selectCONTINUE to download the file. The system will reset at theend of the file transfer to put the new configuration into effect.n If you choose to download the configuration file, the TFTPTransfer State item will change from Idle to Reading Config.The TFTP Current Transfer Bytes item will reflect the number of
