General Information38Service Manual – CS7000Scrub Indicators• Scrub Pressure Indicators –indicate the scrub pressuresetting. One LED indicatesthe lightest scrub pressureand three LEDs indicates theheaviest scrub pressure.• Burst of Power Indicator – lightsduring normal operation;flashes to indicate a 60-secondburst of power.• Solution Flow Indicators –indicate the solution flowsetting. One LED indicatesthe lowest solution flow andfive LEDs indicate the highestsolution flow.• Vacuum/Wand Indicator –indicates that the vacuumsystem is enabled.• Detergent Indicator – indicatesthat the detergent system isenabled.Sweep Controls• Broom Height Raise/LowerButtons – raise and lower theselected broom from its currentposition.• Side Broom Switch – enables anddisables the side brooms. Notethat if you switch off the sidebrooms, the DustGuard™ spraynozzles will also switch off.• One-touch Sweep Switch –enables the main broom, sidebrooms, dust control fan andDustGuard™ spray nozzles.• Main Broom Float Switch –directs the main machinecontroller to drive the mainbroom actuator all the waydown so the weight of the mainbroom is resting on the floor.The linkage is slotted to allowthe broom to follow the contourof the floor.ScrubPressureIndicatorsSolutionFlowIndicatorsBurst ofPowerIndicator(EcoFlex™only)Vacuum/WandIndicatorDetergentIndicatorOne-touchSweepSwitchBroomHeightLowerButtonBroomSelectSwitchBroomHeightRaiseButtonSideBroomSwitchDust-Guard™SpraySwitchFilterShakerSwitchDustControlFanSwitchMainBroomFloatSwitch
