Control System57Service Manual – CS7000Hidden MenusThe main machine controller supports a “hidden menu” which allows you to match the controller to themachine, set some user options and perform time saving service tests. There are three main hidden menusmodes; Configuration Display, Configuration Menu and User Options Menu. A unique switch sequence isused to enter each mode.Configuration DisplayThe configuration display mode is a “read only” mode that allows you to check how the main machinecontroller thinks the machine is equipped without running the risk of accidentally changing a value. It alsoallows you to check historical faults for the main machine controller, steering controller and drive controller.To enter the Configuration Display:1. While Pressing and holding the hazard flasher switch, turn the key on.2. Continue to hold the switch until the LCD reads “Configuration Display”, and then release the switch.Once in the configuration display, you can scroll the “arrow cursor” through the menu using the scrubpressure increase and decrease buttons. To enter a menu selection, press the One-touch scrub switch. To exitand return to the configuration display mode, press the solution switch. To exit the hidden menu, turn thekey switch off.Scroll UpScroll DownEnterExit