General Information39Service Manual – CS7000• Dust Control Fan Switch – enables and disables the dust control fan.• Broom Select Switch – functions as follows:– When the one-touch sweep is enabled, the Broom Select Switch selects the broom (main broom or sidebrooms) that will be raised or lowered when the Broom Height Raise Button and Broom Height LowerButton are pressed.– When the one-touch sweep is not enabled, pressing the Broom Select Switch once will lower the sidebrooms, switch on the side broom motors for a short time, then raise the side brooms. Pressing theBroom Select Switch twice will lower the main broom, switch on the main broom motor for a short time,then raise the main broom.• DustGuard™ Spray Switch – enables and disables the DustGuard™ spray nozzles.• Filter Shaker Switch – switches on the filter shaker. The shaker will cycle 16 times, then switch off.Sweep Indicators• Main Broom On Indicator –indicates that the main broomis enabled.• Side Broom On Indicator –indicates that the side broomsare enabled.• Main Broom Float Indicator –indicates that the main broomis set to the “float” mode.• Dust Control Fan On Indicator –indicates that the dust controlfan is enabled.• DustGuard™ On Indicator –indicates that the DustGuard™system is enabled.• Filter Shaker On Indicator –indicates that the filter shakermotor is running.Main BroomOn IndicatorSide BroomOn IndicatorDust-Guard™OnIndicatorFilterShakerOnIndicatorMainBroomFloatIndicatorDustControlFan OnIndicator