A CCESS G ATEWAY128 System AdministrationDefining the RADIUS Proxy Settings {RADIUS Proxy}A RADIUS Proxy allows the NSE to relay authentication and accounting packets between the partiesperforming the authentication process. Different realms can be set up to directly channel RADIUS messages tothe various RADIUS servers.For additional RADIUS information, see also: Setting up Quality of Service {QoS} on page 122 Defining the Realm-Based Routing Settings {Realm-Based Routing} on page 130 RADIUS Attributes on page 2451. From the Web Management Interface, click on Configuration, then RADIUS Proxy. The RADIUSProxy Settings screen appears:2. Enable or disable RADIUS Proxy Services, as required, by clicking on the appropriate check box.3. If you enabled RADIUS Proxy Services, you must provide the Authentication Server Port and theAccounting Server Port references.4. Click on the Save button to save your changes, or click on the Restore button if you want to reset all thevalues to their previous state.See Adding an Upstream RADIUS NAS.Adding an Upstream RADIUS NAS1. If you want to add a new Upstream RADIUS NAS (for example, an 802.11 Access Point on thesubscriber side of the Access Gateway), click on the Add button. The Add Upstream RADIUS NAS screenappears:
