A CCESS G ATEWAY226 Quick Reference GuideDefault (Factory) Configuration SettingsThe following table shows a partial listing of the Access Gateway’s primary default configuration settings (thesettings established at manufacturing). For a complete listing of the factory default settings, refer to thefactory.txt file. For more information, go to Importing the Factory Defaults {Factory} on page 195.Function Default SettingVersionNomadix Access Gateway IDNetwork Interface MACSubscriber Interface MACNomadix Access Gateway v8.8.xxx (depends on firmware version)AG5900MAC address is unique for each productMAC address is unique for each productNetwork Interface IP SubscriberIP Subnet Mask DefaultGateway IPDHCP ClientAdmin IP10.0.0.1010.0.0.11255.255.255.010.0.0.1Enabled 172.30.30.172Domain Host NamePrimary DNSSecondary DNSTertiary DNSnomadix.AG3100 0.0.0.20.0.0.00.0.0.0DHCP RelayExternal DHCP Server IP DHCPRelay Agent IP DHCP ServerDHCP Server IP DHCP SubnetMask DHCP Pool Start IP DHCPPool End IPLease Duration MinutesDisabled 0.0.0.00.0.0.0Enabled 10.0.0.4255.255.255.010.0.0.1210.0.0.2501440Home Page RedirectionParameter Passing RedirectionFrequency MinutesDisabledDisabled3600Dynamic Address Translation (DAT) Enabled (cannot be changed)AAA LoggingAAA Log Server NumberAAA Log Server IPSYSLOG (System Logging)SYSLOG Server NumberSYSLOG Server IPDisabled30.0.0.0Disabled20.0.0.0AAA ServicesInternal AuthorizationNew SubscribersPayPal ServiceDisabledEnabledEnabledEnabled
